The purpose of your gutter system is to direct water away from your roof and away from the side of your house. A clogged gutter can't do any of these things effectively, if at all. As the gutter overflows, water will build up again on the roof, causing excessive damage to the shingles. The pitch and slope of the gutters make the difference.
If the gutter is tilted away from home, it could be causing an overflow (especially during severe storms). The passage of the gutter that leads to a downspout can also cause overflow if it is too steep. The same goes for a lack of tar, which causes water to accumulate at one point, rather than flow to an outlet. Beyond the initial risk, moisture damage or exposure to overflow can cause persistent problems, such as discoloration, warping, and rotting.
It may be hard to imagine, but this type of overflow can ruin your life and damage not only your drainage system, but potentially your entire home as well. That is why it is important to take measures to prevent such a disastrous scenario from occurring. When water overflows a container and flows into unwanted areas, it not only creates a big mess that can take time to clean up, but it also opens up the possibility of damaging the surrounding environment. An overflowing toilet can damage the bathroom floor.
A clogged sink can push water toward counters and ruin them. And a receding floor drain can wreak havoc on walls and furniture. If there are not enough gutters on the sides of your house, rainwater may overflow. This can overload gutters and downspouts and damage them.
Damaged gutters and downspouts can start to leak. This can damage your home because rainwater can seep into the foundation. If your home had problems with water running through the gutters in these high-traffic areas before the gutters were covered. When gutters become “too loose”, water usually forms a spout or lip on the face of the gutter to escape.
You can solve this problem by investing in clog-resistant gutters for your home or cleaning the gutters when the seasons change. But what really causes gutters to overflow? These are the three main common causes of gutter blockage and overflow. Gutters may be clogged with leaves or other debris; a ball or other toys may have been caught in the gutter. Make sure the gutters do not leak, and then clean or repair the gutters to avoid shutdowns or possible obstructions that could prevent water flow.
If you can see the inside of your gutter from the ground or from street level, the gutter is likely to be “tilted” or “tilted”. Gutters that have been loosened will leak or overflow in different ways depending on how loose the gutter is. The gutters are designed to channel runoff water to the downspouts, but if something prevents that from happening, the water will simply flow out of the roof and then spill down the sides of the gutters. Where, as if the same gutter were about to fall out of the house, all the water would flow out of the gutter like a bucket.
If your gutter system simply can't withstand the amount of rain falling on the roof, consider using larger splash guards or gutters. For example, a gutter that is slightly loose may have only a little water behind the gutter that flows down the wall. There are a few different things that could cause your gutter system to overflow or leak. Moonworks is a certified installer of the Gutter Helmet system, so if you would like more information on obtaining Gutter Helmet for your home, complete this form or call Moonworks at 1-800-975-6666 for a free on-site inspection.
If you have checked for debris and you have the correct size gutters in the right number, and you still have to deal with overflowing gutters, call a gutter installation professional in your area to investigate the problem. If the debris is small enough and the gutters are configured correctly, the debris will flow directly through the gutter and downspout system. .
